ATA (44) Internal

From HwB

ATA=AT bus Attachment

This connector is mostly used for 2.5" internal harddisks.
See ATA Internal for pin 1-40.

44 pin (2.0mm pitch) for 2.5" harddisks.
44 pin (1.27mm pitch) for 1.8" harddisks.

Pinout

Idc44m.png

44 PIN IDC MALE at the controller & peripherals.

Idc44f.png

44 PIN IDC FEMALE at the cable.

Pin Name Dir Description
41 +5VL Arrowr.png +5 VDC (Logic)
42 +5VM Arrowr.png +5 VDC (Motor)
43 GND Arrow.png Ground
44 /TYPE Arrowr.png Type (0=ATA)

Note: Direction is Controller relative Devices (harddisks).

Contributions